The Standard Electrical Dictionary - Part 156
Library

Part 156

Telephote.

An apparatus for transmitting pictures electrically, the properties of selenium being utilized for the purpose.

Synonym--Pherope.

Teleseme.

An annunciator, displaying on a dial the object wanted by the person using it. It is employed to transmit messages from rooms in a hotel to the office, or for similar functions.

Tele-thermometer.

A thermometer with electric attachment for indicating or recording its indications at a distance.

Tempering, Electric.

A process of tempering metals by electrically produced heat. The article is made part of an electric circuit. The current pa.s.sing through it heats it, thereby tempering it. For wire the process can be made continuous. The wire is fed from one roll to another, and if required one roll may be immersed in a liquid bath or the wire between the rolls may be led therein. The current is brought to one roll and goes through the wire to the other. As it does this the wire is constantly fed from one roll to another. The bath may be used as described to cool it after the heating. The amount of heating may be regulated by the rate of motion of the wire.

528 STANDARD ELECTRICAL DICTIONARY.

Ten, Powers of.

This adjunct to calculations has become almost indispensable in working with units of the C. G. S. system. It consists in using some power of 10 as a multiplier which may be called the factor. The number multiplied may be called the characteristic. The following are the general principles.

The power of 10 is shown by an exponent which indicates the number of ciphers in the multiplier. Thus 10^2 indicates 100; 10^3 indicates 1,000 and so on.

The exponent, if positive, denotes an integral number, as shown in the preceding paragraph. The exponent, if negative, denotes the reciprocal of the indicated power of 10. Thus 10^-2 indicates 1/100; 10^-3 indicates 1/1000 and so on.

The compound numbers based on these are reduced by multiplication or division to simple expressions. Thus: 3.14 X 10^7 = 3.14 X 10,000,000 = 31,400,000. 3.14 X 10^-7 = 3.14/10,000,000 or 314/1000000000. Regard must be paid to the decimal point as is done here.

To add two or more expressions in this notation if the exponents of the factors are alike in all respects, add the characteristics and preserve the same factor. Thus:

(51X 10^6) + (54 X 10^6) = 105 X 10^6.

(9.1 X 10^-9) + (8.7 X 10^-9) = 17.8 X 10^-9.

To subtract one such expression from another, subtract the characteristics and preserve the same factor. Thus:

(54 X 10^6) - (51 X 10^6) = 3 X 10^6.

If the factors have different exponents of the same sign the factor or factors of larger exponent must be reduced to the smaller exponent, by factoring. The characteristic of the expression thus treated is multiplied by the odd factor. This gives a new expression whose characteristic is added to the other, and the factor of smaller exponent is preserved for both,

Thus: (5 X 10^7) + (5 X10^9) = (5 X 10^7) + (5 X 100 X 10^7) = 505 X 10^7.

The same applies to subtraction. Thus: (5 X 10^9) - (5 X 10^7) = (5 X 100 X 10^7) - (5 X 10^7) = 495 X 10^7.

If the factors differ in sign, it is generally best to leave the addition or subtraction to be simply expressed. However, by following the above rule, it can be done. Thus:

Add 5 X 10^-2 and 5 X 10^3.

5 X 10^3 = 5 X 10^5 X 10^-2 (5 X 10^5 X 10^-2) + (5 X 10^-2) = 500005 X 10^-2

This may be reduced to a fraction 500000/100 = 5000.05.

To multiply add the exponents of the factors, for the new factor, and multiply the characteristics for a new characteristic. The exponents must be added algebraically; that is, if of different signs the numerically smaller one is subtracted from the other one, and its sign is given the new exponent.

Thus; (25 X 10^6) X (9 X 10^8) = 225 X 10^14.

(29 X 10^ -8) X (11 X 10^7) = 319 X 10^-1 (9 X 10^8) X (98 X 10^2) = 882 X 10^1

529 STANDARD ELECTRICAL DICTIONARY.

To divide, subtract (algebraically) the exponent of the divisor from that of the dividend for the exponent of the new factor, and divide the characteristics one by the other for the new characteristic. Algebraic subtraction is effected by changing the sign of the subtrahend, subtracting the numerically smaller number from the larger, and giving the result the sign of the larger number.

(Thus to subtract 7 from 5 proceed thus; 5 - 7 = -2.)

Thus; (25 X 10^6) / (5 X 10^8) = 5 X 10^-2 (28 X 10^-8) / (5 X 10^3) = 5.6 X 10^-11

[Transcriber's note: I have replaced ordinary exponential notation by the more compact and simpler "programming" representation. The last two example would be: 25E6 / 5E8 = 5E-2 28E-8 / 5E3 = 5.6E-11 ]

Tension.

Electro-motive force or potential difference in a current system is often thus termed. It is to be distinguished from intensity or current strength, which word it too greatly resembles.

Tension, Electric.

(a) The condition an electrified body is brought into by electrification, when each molecule repels its neighbor. The condition is described as one of self-repulsion.

(b) The voltage or potential difference of a circuit is also thus termed.

Terminal.

The end of any open electric circuit, or of any electric apparatus; as the terminals of a circuit, dynamo, or battery.

Terminal Pole.

In telegraph line construction the last pole of a series; one beyond which the line is not carried. Such pole, as the pull of the wires is all in one direction, requires special staying or support. The regular line poles are free from this strain, as the wire pulls in both directions.

Teta.n.u.s, Acoustic.

A term in electro-therapeutics. An effect produced on a nerve by very rapidly alternating induced currents. The currents are produced by an induction coil with a vibrator giving a musical note. This is a species of gauge of proper frequency of alternations.

Theatrophone.

An apparatus worked by automatic paying machinery by which a telephone connection is made with a theatre or opera by the deposition of a coin in a slot.

Therm.

A unit of heat. It has been proposed by the British a.s.sociation and amounts to a redefinition of the smaller calorie. It is the amount of heat required to raise the temperature of one gram of water one degree centigrade, starting at the temperature of maximum density of water.