DESIGNS.

2,846.--MASONIC BADGE--Virgil Price, New York city.

2,847.--COOK'S STOVE.--Russell Wheeler, Utica, N.Y.

PENDING APPLICATIONS FOR REISSUES.

_Application has been made to the Commissioner of Patents for the Reissue of the following Patents, with new claims as subjoined.

Parties who desire to oppose the grant of any of these reissues should immediately address MUNN & Co., 37 Park Row, N.Y._

40,571.--ROTARY ENGINE.--Metropolitan Rotary Engine Co. (a.s.signees by mesne a.s.signments of Adolph Mulochan), New York city. Dated Nov. 10, 1863. Application for reissue received and filed Sept. 27, 1867.

1st, The combination with the outer stationary case, d, and its concentric inner cylinder or f.l.a.n.g.es, x, of the eccentric wheel, ring or rim, c, fast to the rotating shaft and carrying radial slides or pistons for simultaneous action and exposure to the steam or fluid in chambers, y and z, on opposite sides or peripheries of the ring, c, essentially as herein set forth.

2d, The pipes, i l n o, and valves or c.o.c.ks k k' m' and m', in combination--with the ring c and pistons acting in the steam s.p.a.ces, y and z, substantially as specified.

2,821 (whole No. 33,825).--LAMP.--Charles W. Cahoon, Portland Me Dated Dec. 3, 1861. Application for reissue received and filed Nov 23 1867.

1st, A lever with chimney fastenings having that part of it on which the chimney rests extended so as to form a deflector substantially as described.

2d, The deflector board or flat shaped or nearly so when made not only as a deflector but partly as a chimney holder substantially as described.

3d, The combination of the said deflector with the conical foraminous piece of metal and the cylindrical tubular air screen for the purpose of forming the air chamber, A, protecting the flame and admitting the air from below the same, substantially as described.

4th, The combination with the lever for raising the chimney of the deflector air screen and foraminous piece of metal, substantially as and for the purposes specified.

5th, The ring surrounding the wiek tube a little above the top of the same with the standards, s s, substantially as and for the purposes specified.

6th, A chimney holder having a projection for manipulating the same, chimney fastenings, a deflector and a joint substantially as and for the purposes set forth.

7th, The combination of the ring, f, supports, s s, and air screen, c, substantially as and for the purpose set forth.

8th, The combination of the gla.s.s body of a lamp with a metallic handle, substantially as and for the purpose set forth.

61,956.--COOKING STOVE.--J.J. Savage Troy, N.Y. Dated Feb. 12, 1867 Application for reissue received and filed Dec. 4, 1867.

1st, I claim constructing a heating stove with its fuel door way or aperture, B, below, and forward of its flame or combustion chamber and contiguous to or adjoining its fire box, A, in manner substantially as and for the purposes herein set forth.

2d, I claim the combination of the fuel door way or aperture, B, and the firebox, A, extended contiguously thereunder as applied to heating stoves, in manner substantially as and for the purposes set forth.

3d, I claim in combination with a heating stove having its fuel door way in the position as herein described, the employment therewith of a lifting lever, F, substantially in manner as and for the purposes herein set forth.

4th, I claim, in a heating stove, in combination with a fire box, back lining plates and its fuel door way or aperture, B, the arrangement of a front lining plate, E, in position between the flame chamber, C, and the said fuel aperture in manner substantially as and for the purpose set forth.

5th, In combination with a lever lifter, F, applied to heating stoves in manner as herein described, I claim the employment of a holding hook, b, and catch ridge, e, substantially as and for the purpose set forth.

6th, I claim so constructing a heating stove in manner substantially as described herein that fresh fuel may be cast directly into its fire box below and between ignited fuel or c.o.ke therein, in manner substantially as herein set forth for the purposes specified.

16,944.--GUN POWDER KEG.--Henry E. Irenee L. and Eugene Du Pont (a.s.signees of James Wilson and William Wilson, J. and Charles Green for themselves) Wilmington, Del. Dated March 31, 1857. Application for reissue received and filed Nov. 30, 1867.

1st, As a new article of manufacture a keg or can with a series of corrugations representing hoops which give combined strength and finish.

2d, Casting the female screw for the stopper on a tap or mandrel, as set forth.

3d, The extra ring or boss, D, and head, C, as set forth.

62,693.--MACHINE FOR CUTTING THREADS ON BOLTS.--Schweitzer Patent Bolt Co. (a.s.signees of Franzis Schweizer), New York city. Dated March 5, 1867. Application for reissue received and filed Nov. 30, 1867.

1st, The sliding or movable heads, N O, in combination with the lever, P, and cutter or dies, a b, substantially as and for the purpose described.

2d, The adjustable lever, P, provided with arms, d e, substantially as and for the purpose set forth.

3d, The elastic rest, g, constructed and operating substantially as and for the purpose shown and described.

53,169.--MARKING WHEEL.--Horace Holt, New York city. Dated Jan. 23, 1866. Application for reissue received and filed Nov. 30, 1867.

1st, The combination of the type wheel, A, inking roller, C, and handle, B, substantially as and for the purpose described.

2d, The ink reservoir, e, in combination with the roller, C, type wheel, A, and handle, B, substantially as and for the purpose set forth.

3d, The projecting f.l.a.n.g.es, b, on the type wheel, A, constructed and operating substantially as and for the purpose described.

4th, The stop, h, in combination with the type wheel, A, and handle, B, substantially as and for the purpose set forth.

5th, Ihe spring, g, in combination with the stop, h, type wheel, A, and handle, B, substantially as and for the purpose described.

18,872.--BORING MACHINE.--A. Wyckoff (a.s.signee by mesne a.s.signments of La Fayette Stevens), Elmira, N.Y. Dated Dec. 15, 1857. Application for reissue received and filed Nov. 29, 1867.

1st, Ihe hollow cylindrical stock of an annular auger in combination with a spiral f.l.a.n.g.e with such a pitch as will remove the cuttings horizontally as made and deliver them from the opening of the annular kerf, substantially as set forth.

2d, The combination of a hollow annular bit having their cutting lips projecting in the direction of the rotation of the bit, a hollow cylindrical stock and a spiral f.l.a.n.g.e substantially as described.

3d, An annular bit formed in one piece and used in combination with a hollow cylindrical stock for cutting an annular kerf in a stick of timber, substantially as set forth.