6th. The combination of the rod, u, lever, l', spring, s, trigger, n, doors, m m' m", having the lips, o o o, rod, y', and hook, y, substantially as and for the purposes specified.

72,099.--AUGER HANDLE.--Daniel Y. Smith, Joliet, Ill.

I claim the combination of the ferrule, a, with the annular nut, e, and flat spring, c, when constructed and arranged as and for the purposes set forth.

72,100.--MACHINE FOR SHARPENING SAWS.--J.B.Smith, Milwaukee, Wis.

I claim cutter, B, gauge, E, and adjustable cone-mandrel, D, in combination, substantially as and for the purpose described.

72,101.--RAISING OILS AND BURNING-FLUIDS BY PNEUMATIC PRESSURE.--John Henry Smith, Allegheny city, Pa.

I claim raising, by pneumatic pressure, oils or burning-fluids from an oil or fluid compartment of a ship or other vessel, and mixing with said oil and fluid the gas generated therefrom, as herein described and set forth.

Also, the combination and arrangement of the pipes, A B C f and f', when used in connection with the oil or fluid compartment, R, of a ship or other vessel, the whole being constructed, arranged, and operating substantially in the manner hereon described and set forth.

Also, in connection with the above, ejecting fine jets of water into the flame, caused by the burning of the oil or fluid and other matter mixed therewith, as herein described and set forth.

72,102.--SHIP FOR TRANSPORTING PETROLEUM.--John H. Smith, Allegheny city, Pa.

I claim, providing the hulls of ships and other vessels with a compartment for oils and burning fluids, said compartment being protected with water, and furnished with supply and discharge pipes, substantially as herein described and for the purpose set forth.

72,103.--DEVICE FOR SHEARING AND CLIPPING WOOL.--R.T.Smith and J.K.Priest, Nashua, N.H.

I claim, 1st, The revolving spring cutter or cutters, O, in connection with a cutter-plate.

2d, The open cutter-plate, P.

3d, The shield, N, in connection with the cylinder, C, covering shaft, M, and extending into groove, g, substantially in the manner and for the purpose herein described.

72,104.--CORN PLOUGH.--John Snyder, Williamsfield, Ohio.

I claim the combination of the tongue, H, strap, L, and upright, K, with the forward end of the central beam, A, substantially as herein shown and described, and for the purpose set forth.

72,105.--BOOT-HEEL POLISHER.--V.K.Spear, Lynn, Ma.s.s.

I claim, 1st, The reciprocating polisher, moving in the line of an arc of a circle, by means of mechanism substantially as herein described, and having an elastic bearing, as and for the purpose set forth.

2d, In combination with a reciprocating polisher, substantially as described, I claim the pivoted sliding frame to support the boot or shoe constructed, arranged, and operating substantially as set forth.

72,106.--MEANS FOR PROPELLING VESSELS.--Robt.R. Spedden and Daniel F.

Stafford, Astoria, Oregon.

We claim, 1st, The combination of the rack-frame, K, racks, I and J, and ratchet wheel, H, with each other and with a shaft, D, for the purpose of applying power to said shaft, substantially as herein shown and described.

2d, The combination of the stationary post, O, pitman, N, rocking-post, M, and adjusting slide, L, with each other, with the rack frame, K, and with the hinged parts of a vessel or other structure, one or both of said hinged parts floating in the water, so as to be acted upon by the motion of the waves, substantially as herein shown and described.

72,107.--CULTIVATOR.--C.E.Steller, Chicago, Ill.

I claim, 1st, The hinged runners, J W, substantially as and for the purpose set forth.

2d, The slotted sides, A A and B B, in combination with the shanks, C D E, arranged to be set at different angles, and fastened by set-screws, Z Z, as described.

3d, The combination of the guide-bar, E, arranged to be raised and lowered, with rear standards, H H, and sides, A A B B, as described.

4th, The combination of standards, G G, hinged runners, J W, and sides, A A B B, as set forth.

5th, The shanks, U, of shovel, T, arranged to fit in a socket, V, and bar, S, in combination with standards, G G, and cross-bar, I, as and for the purpose set forth.

6th, The double evener, L, arranged substantially as set forth.

7th, The double evener, L, in combination with braces, O O and P P, with or without braces, Y, substantially as set forth.

72,108.--EYE CUP.--Benj. F. Stephens, Brooklyn, N.Y.

I claim a pair of bowls, united by tubes or necks to an exhaustion-bag or ball, as and for the purposes set forth.

72,109.--HARVESTER RAKE.--Edward Stewart, Fort Madison, Iowa.

I claim the arrangement of the shafts, D E and G, with their respective wheels, crank, I, and pitman, J, with its dividing end, J', connecting the arms, e e, upon the box, K', at the end of shaft, K, the whole constructed and operating substantially as and for the purposes specified.

72,110.--STREET PAVEMENT.--H. M. Stow, San Francisco, Cal.

I claim, 1st, A wooden pavement, composed of alternate tiers of square-ended and wedge-shaped blocks, the wedge-shaped ends of the latter being driven down into a foundation-bed of sand or earth, substantially as and for the purpose described.

2d, A wooden pavement, composed of blocks with lower ends wedge-formed, and all driven down into a foundation-bed of sand or earth, substantially as shown and described.

72,111.--STREET PAVEMENT.--H. M. Stow, San Francisco, Cal.

I claim, 1st, The cast iron plates, with projecting wedge-shaped f.l.a.n.g.es to be driven into the sand or earth, substantially as and for the purpose set forth.

2d, Also, a pavement composed of alternate tiers of cast iron plates, with projecting wedge-shaped f.l.a.n.g.es and wedge-shaped wooden blocks, driven into the sand and earth, substantially as described.

72,112.--WASHING MACHINE.--John D Swartz, Milton, Pa

I claim, 1st, The slotted aims, g, bearing the shaft, D, and rubber, C, when such arms are connected at their lower ends by the slotted bar, E, through which the spring, G, pa.s.ses as herein described for the purpose specified.