Manual of Military Training - Part 43
Library

Part 43

=697.= Being at order arms: =1. Unfix, BAYONET.=

If the bayonet scabbard is carried on the belt: Take the position of parade rest, grasp the handle on the bayonet firmly with the right hand, press the spring with the forefinger of the left hand, raise the bayonet until the handle is about 6 inches above the muzzle of the piece, drop the point to the left, back of hand toward the body, and glancing at the scabbard, return the bayonet, the blade pa.s.sing between the left arm and body; regrasp the piece with the right hand and resume the order.

If the bayonet scabbard is carried on the haversack: Take the bayonet from the rifle with the left hand and return it to the scabbard in the most convenient manner.

If marching or lying down, the bayonet is fixed and unfixed in the most expeditious and convenient manner and the piece returned to the original position.

Fix and unfix bayonet are executed with promptness and regularity, but not in cadence. (96)

=698.= Being at order arms: =1. Inspection, 2. ARMS.=

At the second command, take the position of port arms. (=TWO.=) With the right hand open the magazine gate, turn the bolt handle up, draw the bolt back and glance at the magazine and chamber. Having found them empty, or having emptied them, raise the head and eyes to the front. (98)

=699.= Being at inspection arms: =1. Order (Right shoulder, port), 2.

ARMS.=

At the preparatory command, push the bolt forward, turn the handle down, close the magazine gate, pull the trigger, and resume port arms.

At the command =arms=, complete the movement ordered. (99)

=700.= Pieces being loaded and in the position of load, to execute other movements with the pieces loaded: =1. Lock, 2. PIECES.=

At the command =pieces= turn the safety lock fully to the right.

The safety lock is said to be at the "ready" when turned to the left, and at the "safe" when turned to the right.

The cut-off is said to be "on" when turned up and "off" when turned down. (134)

=701.= Being in line or skirmish line at halt: =1. With dummy (blank or ball) cartridges, 2. LOAD.=

At the command =load= each front-rank man or skirmisher faces half right and carries the right foot to the right, about one foot, to such position as will insure the greatest firmness and steadiness of the body; raises or lowers the piece and drops it into the left hand at the balance, left thumb extended along the stock, muzzle at the height of the breast. With the right hand he turns and draws the bolt back, takes a cartridge between the thumb and first two fingers and places it in the receiver; places palm of the hand against the back of the bolt handle; thrusts the bolt home with a quick motion, turning down the handle, and carries the hand to the small of the stock. Each rear-rank man moves to the right front, takes a similar position opposite the interval to the right of his front-rank man, muzzle of the piece extending beyond the front rank, and loads.

A skirmish line may load while moving, the pieces being held as nearly as practicable in the position of load.

If kneeling or sitting, the position of the piece is similar; if kneeling, the left forearm rests on the left thigh; if sitting, the elbows are supported by the knees. If lying down, the left hand steadies and supports the piece at the balance, the toe of the b.u.t.t resting on the ground, the muzzle off the ground.

For reference, these positions (standing, kneeling, and lying down) are designated as that of =load=. (139)

=702. FILL MAGAZINE.=

Take the position of load, if not already there, open the gate of the magazine with the right thumb, take five cartridges from the box or belt, and place them, with the bullets to the front, in the magazine, turning the barrel slightly to the left to facilitate the insertion of the cartridges; close the gate and carry the right hand to the small of the stock.

To load from the magazine the command =from magazine= will be given preceding that of =load=; the =cut-off= will be turned up on coming to the position of =load=.

To resume loading from the belt the command from belt will be given preceding the command =load=; the =cut-off= will be turned down on coming to the position of =load=.

The commands =from magazine= and =from belt=, indicating the change in the manner of loading, will not be repeated in subsequent commands.

The words =from belt= apply to cartridge box as well as belt.

In loading from the magazine care should be taken to push the bolt fully forward and turn the handle down before drawing the bolt back, as otherwise the extractor will not catch the cartridge in the chamber, and jamming will occur with the cartridge following.

To fire from the magazine, the command =magazine fire= may be given at any time. The cut-off is turned up and an increased rate of fire is executed. After the magazine is exhausted the cut-off is turned down and the firing continued, loading from the belt.

=Magazine fire= is employed only when, in the opinion of the platoon leader or company commander, the maximum rate of fire becomes necessary. (141)

=703. UNLOAD.=

All take the position of load, turn the =cut-off= up, if not already there, turn the safety lock to the left, and alternately open and close the chamber until all the cartridges are ejected. After the last cartridge is ejected the chamber is closed and the trigger pulled. The cartridges are then picked up, cleaned, and returned to the box or belt, and the piece brought to the order. (142)

=704. CLIP FIRE.=

Turn the cut-off up; =fire at will= (reloading from the magazine) until the cartridges in the piece are exhausted; turn the cut-off down; fill magazine; reload and take the position of =suspend firing=.

(148)

=705. CEASE FIRING.=

Firing stops; pieces not already there are brought to the position of load, the cut-off turned down if firing from magazine, the cartridge is drawn or the empty sh.e.l.l is ejected, the trigger is pulled, sights are laid down, and the piece is brought to the order.

=Cease firing= is used for long pauses to prepare for changes of position or to steady the men. (150)

APPENDIX B

War Department, Office of the Chief of Staff, Washington, December 2, 1911.

Paragraphs 747, 792, 793, 794, 795, 796, 797, and 798, Infantry Drill Regulations, 1911, apply only to troops equipped with the Infantry Equipment, model 1910. For troops equipped under General Orders, No.

23, War Department, 1906, and orders amendatory thereof, the alternative paragraphs published herewith will govern.

By order of the Secretary of War: LEONARD WOOD, Major General, Chief of Staff.

Note. The paragraph numbers 747, 792, etc., given above, follow the paragraphs below.

=706.= If the inspection is to include an examination of the blanket rolls, the captain, before dismissing the company and after inspecting the file closers, directs the lieutenants to remain in place, closes ranks, stacks arms, dresses the company back to four paces from the stacks, takes intervals, and commands: =1. Unsling, 2.

PACKS, 3. Open, 4. PACKS.=

At the second command, each man unslings his roll and places it on the ground at his feet, rounded end to the front, square end of shelter half to the right.

At the fourth command, the rolls are untied, laid perpendicular to the front with the triangular end of the shelter half to the front, opened, and unrolled to the left; each man prepares the contents of his roll for inspection and resumes the attention.

The captain then returns saber, pa.s.ses along the ranks and file closers as before, inspects the rolls, returns to the right, draws saber and commands: =1. Close, 2. PACKS.=

At the second command each man, with his shelter half smoothly spread on the ground with b.u.t.tons up and triangular end to the front, folds his blanket once across its length and places it upon the shelter half, fold toward the bottom edge one-half inch from the square end, the same amount of canvas uncovered at the top and bottom. He then places the parts of the pole on the side of the blanket next the square end of shelter half, near and parallel to the fold, end of pole about 6 inches from the edge of the blanket; nests the pins similarly near the opposite edge of the blanket and distributes the other articles carried in the roll; folds the triangular end and then the exposed portion of the bottom of the shelter half over the blanket.

The two men in each file roll and fasten first the roll of the front and then of the rear rank man. The file closers work similarly two and two, or with the front rank man of a blank file. Each pair stands on the folded side, rolls the blanket roll closely and buckles the straps, pa.s.sing the end of the strap through both keeper and buckle, back over the buckle and under the keeper. With the roll so lying on the ground that the edge of the shelter half can just be seen when looking vertically downward, one end is bent upward and over to meet the other, a clove hitch is taken with the guy rope first around the end to which it is attached and then around the other end, adjusting the length of rope between hitches to suit the wearer.

As soon as a file completes its two rolls each man places his roll in the position it was in after being unslung and stands at attention.

All the rolls being completed, the captain commands: =1. Sling, 2.